Specifications

3-219
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 3 CLI Commands
show wccp
The following example is the output from the show wccp routers command:
WAE# show wccp routers
Router Information for Service: TCP Promiscuous 61
Routers Configured and Seeing this File Engine(1)
Router Id Sent To Recv ID
0.0.0.0 10.10.20.1 00000000
Routers not Seeing this File Engine
10.10.20.1
Routers Notified of but not Configured
-NONE-
Multicast Addresses Configured
-NONE-
Router Information for Service: TCP Promiscuous 62
Routers Configured and Seeing this File Engine(1)
Router Id Sent To Recv ID
0.0.0.0 10.10.20.1 00000000
Routers not Seeing this File Engine
10.10.20.1
Routers Notified of but not Configured
-NONE-
Multicast Addresses Configured
-NONE-
The following example is the output from the show wccp status command:
WAE# show wccp status
WCCP version 2 is enabled and currently active
Related Commands (config) wccp access-list
(config) wccp flow-redirect
(config) wccp router-list
(config) wccp shutdown
(config) wccp slow-start
(config) wccp tcp-promiscuous
(config) wccp version