Specifications

3-199
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 3 CLI Commands
show tfo auto-discovery
show tfo auto-discovery
To display Traffic Flow Optimization (TFO) auto-discovery statistics for a WAE, use the show tfo
auto-discovery EXEC command.
show tfo auto-discovery [blacklist {entries [netmask netmask] [|] | statistics [|]}] [list] [| {begin
regex [regex] | exclude regex [regex] | include regex [regex]}]
Syntax Description
Command Modes EXEC
Device Modes application-accelerator
Examples The following example displays TFO auto-discovery statistics for the WAE:
WAE# show tfo auto-discovery
Auto discovery structure:
Allocation Failure: 0
Allocation Success: 6615
Deallocations: 6615
Timed Out: 0
Auto discovery table:
Bucket Overflows: 0
Table Overflows: 0
Entry Adds: 6615
Entry Drops: 6615
Entry Count: 0
Lookups: 6624
Bind hash add failures: 0
Route Lookup:
Failures: 0
Success: 0
Socket:
Allocation failures: 0
Accept pair allocation failures: 0
blacklist (Optional) Displays the blacklist servers table.
entries Displays all of the entries in the auto-discovery blacklist server table.
netmask Displays the network mask to filter the table output.
netmask Network mask (A.B.C.D/) for which you want to show the matching
addresses.
statistics Displays the auto-discovery blacklist server table management statistics.
list (Optional) Lists TCP flows that the WAE is currently optimizing or passing
through.
| (Optional) Output modifier.
begin Begins with the line that matches the regular expression.
regex Regular expression to match. You can enter multiple expressions.
exclude Excludes lines that match the regular expression.
include Includes lines that match the regular expression.