Specifications

3-198
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 3 CLI Commands
show tfo accelerators
show tfo accelerators
To display Traffic Flow Optimization (TFO) accelerators information for a WAE, use the show tfo
accelerators EXEC command.
show tfo accelerators
Command Modes EXEC
Device Modes application-accelerator
Examples The following example displays TFO accelerator information for the WAE:
WAE# show tfo accelerators
Name: TFO State: Registered, Handling Level: 100%
Keepalive timeout: 3.0 seconds, Session timeouts: 0, Total timeouts: 0
Last keepalive received 00.5 Secs ago
Last registration occurred 11:21:43:38.4 Days:Hours:Mins:Secs ago
Name: EPM State: Registered, Handling Level: 100%
Keepalive timeout: 5.0 seconds, Session timeouts: 0, Total timeouts: 0
Last keepalive received 00.2 Secs ago
Last registration occurred 11:21:43:36.7 Days:Hours:Mins:Secs ago
Name: CIFS State: Not Registered, Handling Level: 0%
Keepalive timeout: 0.0 seconds, Session timeouts: 0, Total timeouts: 0
Last keepalive received -Never-
Last Registration occurred -Never-
Related Commands show tfo auto-discovery
show tfo bufpool
show tfo connection
show tfo filtering
show tfo status