Specifications

3-197
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 3 CLI Commands
show telnet
show telnet
To display Telnet services configuration for a WAAS device, use the show telnet EXEC command.
show telnet
Syntax Description This command has no arguments or keywords.
Defaults Enabled
Command Modes EXEC
Device Modes application-accelerator
central-manager
Examples The following example displays whether or not Telnet is enabled on the WAAS device:
WAE# show telnet
telnet service is enabled
Related Commands telnet
(config) telnet enable
(config) exec-timeout