Specifications

3-194
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 3 CLI Commands
show tech-support
show tech-support
To view information necessary for Cisco’s TAC to assist you, use the show tech-support EXEC
command.
show tech-support [page]
Syntax Description
Defaults No default behavior or values
Command Modes EXEC
Device Modes application-accelerator
central-manager
Usage Guidelines Use this command to view system information necessary for TAC to assist you with a WAAS device. We
recommend that you log the output to a disk file. (See the
“(config) logging” command.)
Examples The following example displays technical support information:
Note Because the show tech-support command output can be long, excerpts are shown in the this example.
WAE# show tech-support
------------------ version and hardware --------------------
Cisco Wide Area Application Services Software (WAAS)
Copyright (c) 1999-2006 by Cisco Systems, Inc.
...
Version: ce510-4.0.0.180
Compiled 18:08:17 Feb 16 2006 by cnbuild
System was restarted on Fri Feb 17 23:09:53 2006.
The system has been up for 5 weeks, 3 days, 2 hours, 9 minutes, 49 seconds.
CPU 0 is GenuineIntel Intel(R) Celeron(R) CPU 2.40GHz (rev 2) running at 2401MHz
.
Total 1 CPU.
512 Mbytes of Physical memory.
...
BIOS Information:
Vendor : IBM
Version : -[PLEC52AUS-C.52]-
Rel. Date : 05/19/03
...
page (Optional) Displays output page by page.