Specifications

3-155
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 3 CLI Commands
show statistics dre
Related Commands debug
show statistics dre connection
show statistics dre peer
LZ: [msg | in | out | ratio] Number of LZ messages.
Note LZ compression is applied after DRE compression is
applied. (DRE compression is always applied first.)
LZ Bypass: [msg | in | out | ratio] Number of LZ messages that were bypassed for compression.
Average Latency Average time to compress one message for both DRE and LZ in
milliseconds (ms).
Message size distribution Percentage of messages that fall into each size grouping. (The
message size field is divided into 6 size groups.)
Decode Statistics for decompressed messages.
Overall: [msg | in | out | ratio] Aggregated statistics for decompressed messages.
msg = Total number of messages.
in = Number of bytes before decompression.
out = Number of bytes after decompression.
ratio = Percentage of the total number of bytes that were
decompressed.
DRE: [msg | in | out | ratio] Number of DRE messages.
DRE Bypass [msg | in] Number of DRE messages that were bypassed for
decompression.
LZ: [msg | in | out | ratio] Number of LZ messages.
LZ Bypass: [msg | in] Number of LZ messages that were bypassed for decompression.
Latency (Last 3 sec): [max | avg] Maximum time to decompress one message for both DRE and
LZ in milliseconds (ms).
Average time to decompress one message for both DRE and LZ
in milliseconds (ms).
Message size distribution Percentage of messages that fall into each size grouping. (The
message size field is divided into 6 size groups.)
Table 3-65 Field Descriptions for the show statistics dre Command (continued)
Field Description