Specifications

3-147
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 3 CLI Commands
show ssh
show ssh
To display the status and configuration information of the Secure Shell (SSH) service for a WAAS
device, use the show ssh EXEC command.
show ssh
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values
Command Modes EXEC
Device Modes application-accelerator
central-manager
Examples Table 3-63 describes the fields shown in the show ssh display.
Related Commands (config) ssh-key-generate
(config) sshd
Ta b l e 3-63 Field Descriptions for the show ssh Command
Field Description
SSH server supports SSH2 protocol
(SSH1 compatible).
Protocol support statement.
SSH service is not enabled. Status of whether the SSH service is enabled or not enabled.
Currently there are no active SSH
sessions.
Number of active SSH sessions.
Number of successful SSH sessions
since last reboot:
Number of successful SSH sessions since last reboot.
Number of failed SSH sessions since
last reboot:
Number of failed SSH sessions since last reboot.
SSH key has not been generated or
previous key has been removed.
Status of the SSH key.
SSH login grace time value is 300
seconds.
Time allowed for login.
Allow 3 password guess(es). Number of password guesses allowed.