Specifications

3-145
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 3 CLI Commands
show snmp
Table 3-62 describes the fields shown in the show snmp user display.
Related Commands (config) snmp-server community
(config) snmp-server contact
(config) snmp-server enable traps
(config) snmp-server group
(config) snmp-server host
(config) snmp-server location
(config) snmp-server mib
(config) snmp-server notify inform
(config) snmp-server user
Number of requested
variables
Number of variables requested by SNMP managers.
Number of altered variables Number of variables altered by SNMP managers.
Get-request PDUs Number of GET requests received.
Get-next PDUs Number of GET-NEXT requests received.
Set-request PDUs Number of SET requests received.
SNMP packets output Total number of SNMP packets sent by the router.
Too big errors Number of SNMP packets that were larger than the maximum
packet size.
Maximum packet size Maximum size of SNMP packets.
No such name errors Number of SNMP requests that specified a MIB object that does not
exist.
Bad values errors Number of SNMP SET requests that specified an invalid value for
a MIB object.
General errors Number of SNMP SET requests that failed because of some other
error. (It was not a No such name error, Bad values error, or any of
the other specific errors.)
Response PDUs Number of responses sent in reply to requests.
Trap PDUs Number of SNMP traps sent.
Table 3-61 Field Descriptions for the show snmp stats Command (continued)
Field Description
Ta b l e 3-62 Field Descriptions for the show snmp user Command
Field Description
User name String identifying the name of the SNMP user.
Engine ID String identifying the name of the copy of SNMP on the device.
Group Name Name of the SNMP group, or collection of users who have a
common access policy.