Specifications

3-144
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 3 CLI Commands
show snmp
Table 3-60 describes the fields shown in the show snmp group display.
Table 3-61 describes the fields shown in the show snmp stats display.
Start: Starting value for which this instance will be triggered.
ObjOwn: Object owner.
Obj: Object.
EveOwn: Event owner.
Eve: Event. Type of SNMP event. For example: CLI_EVENT.
Delta Value Table: Table containing trigger information for delta sampling.
(0):
Thresh: Threshold value to check against if the trigger type is threshold.
Exis: Type of existence test to perform. Values are 1 or 0.
Read: Indicates whether the MIB instance has been queried or not.
OID: Object ID (Same as MIB instance).
val: Val ue ID .
(2): MIB instance on which the trigger is configured. This is the
second management trigger listed in the show output. The
fields are repeated for each instance listed in this show
command.
Table 3-59 Field Descriptions for the show snmp event Command (continued)
Field Description
Ta b l e 3-60 Field Descriptions for the show snmp group Command
Field Description
groupname Name of the SNMP group, or collection of users who have a
common access policy.
security_model Security model used by the group (either v1, v2c, or v3).
readview String identifying the read view of the group.
writeview String identifying the write view of the group.
notifyview string identifying the notify view of the group.
Ta b l e 3-61 Field Descriptions for the show snmp stats Command
Field Description
SNMP packets input Total number of SNMP packets input.
Bad SNMP version errors Number of packets with an invalid SNMP version.
Unknown community name Number of SNMP packets with an unknown community name.
Illegal operation for
community name supplied
Number of packets requesting an operation not allowed for that
community.
Encoding errors Number of SNMP packets that were improperly encoded.