Specifications

3-142
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 3 CLI Commands
show snmp
Table 3-56 summarizes the mapping of module names to module IDs.
Table 3-57 summarizes the mapping of category names to category IDs.
Table 3-58 describes the fields shown in the show snmp engineID display.
Table 3-59 describes the fields shown in the show snmp event display. The show snmp event command
displays information about the SNMP events that were set using the “snmp trigger” command:
Ta b l e 3-56 Summary of Module Names to ID Numbers
Module Name Module ID
AD_DATABASE 8000
NHM 1
NHM/NHM 2500
nodemgr 2000
standby 4000
sysmon 1000
UNICAST_DATA_RECEIVER 5000
UNICAST_DATA_SENDER 6000
Ta b l e 3-57 Summary of Category Names to ID Numbers
Category Name Category ID
Communications 1
Service Quality 2
Processing Error 3
Equipment 4
Environment 5
Content 6
Ta b l e 3-58 Field Descriptions for the show snmp engineID
Field Description
Local SNMP Engine ID String that identifies the copy of SNMP on the local device.
Ta b l e 3-59 Field Descriptions for the show snmp event Command
Field Description
Mgmt Triggers Output for management triggers, which are numbered 1, 2, 3,
and so on in the output.
(1): Owner: Name of the person who configured the trigger. “CLI” is the
default owner; the system has a default trigger configured.