Specifications

3-137
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 3 CLI Commands
show running-config
show running-config
To display a WAAS device’s current running configuration information on the terminal, use the show
running-config EXEC command. This command replaces the write terminal command.
show running-config
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values
Command Modes EXEC
Device Modes application-accelerator
central-manager
Usage Guidelines Use this EXEC command in conjunction with the show startup-config command to compare the
information in running memory to the startup configuration used during bootup.
Examples The following example displays the currently running configuration of a WAAS device:
WAE# show running-config
! WAAS version 4.0.0
!
device mode central-manager
!
!
hostname waas-cm
!
!
!
!
!
exec-timeout 60
!
!
primary-interface GigabitEthernet 1/0
!
!
...
Related Commands configure
copy running-config
copy startup-config