Specifications

3-135
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 3 CLI Commands
show radius-server
show radius-server
To display RADIUS configuration information for a WAAS device, use the show radius-server EXEC
command.
show radius-server
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values
Command Modes EXEC
Device Modes application-accelerator
central-manager
Examples Table 3-54 describes the fields shown in the show radius-server display.
Ta b l e 3-54 Field Descriptions for the show radius-server Command
Field Description
Login Authentication for
Console/Telnet Session
Indicates whether a RADIUS server is enabled for login
authentication.
Configuration Authentication for
Console/Telnet Session
Indicates whether a RADIUS server is enabled for
authorization or configuration authentication.
Authentication scheme fail-over
reason
Indicates whether the WAAS devices fail over to the
secondary method of administrative login authentication
whenever the primary administrative login authentication
method.
RADIUS Configuration RADIUS authentication settings.
Key Key used to encrypt and authenticate all communication
between the RADIUS client (the WAAS device) and the
RADIUS server.
Timeout Number of seconds that the WAAS device waits for a
response from the specified RADIUS authentication server
before declaring a timeout.
Servers RADIUS servers that the WAAS device is to use for RADIUS
authentication.
IP Hostname or IP address of the RADIUS server.
Port Port number on which the RADIUS server is listening.