Specifications

3-131
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 3 CLI Commands
show print-services
show print-services
To display administrative users who have access to configuration privileges, print services, or print
service processes on a WAAS device, use the show print-services EXEC command.
show print-services {drivers user username | process}
Syntax Description
Defaults No default behavior or values
Command Modes EXEC
Device Modes application-accelerator
central-manager
Examples Table 3-52 describes the fields shown in the show print-services process display.
process Displays information about the print server and print spooler.
drivers Displays printer drivers on this print server.
user username Specifies a username that belongs to the print admin group.
Ta b l e 3-52 Field Descriptions for the show print-services process Command
Field Description
Print server is running. Operation status of the print server.
Print spooler is running. Operation status of the print spooler.
Print Server Status
Samba version 3.0.20 Samba version being used.
PID Process ID. Process identification number of the Samba process
on the WAE Linux appliance.
Username UNIX user that has started the Samba process.
Group UNIX group to which the user belongs.
Machine Machine name and IP address. The machine name is the same
as the NetBIOS name.
Service Remote procedure call (RPC) port that is used by clients to
connect to the print server. Value is always IPC$.
pid Process ID. Process identification number of the Samba process
on the WAE Linux appliance.
machine Machine name.
Connected at Date and time of connection to the print server.