Specifications

3-125
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 3 CLI Commands
show policy-engine application
show policy-engine application
To display application policy information for a WAE, use the show policy-engine application EXEC
command.
show policy-engine application {classifier [app-classifier] | dynamic | name}
Syntax Description
Command Modes EXEC
Device Modes application-accelerator
Usage Guidelines Use the show policy-engine application dynamic command to show auto-discovered CIFS file servers
that are added to the list. The servers are visible in the dynamic listing for a limited time (3 minutes by
default) after any activity stops, and then they are dropped from the dynamic list until another client
request causes them to be auto-discovered again.
Examples Table 3-48 describes the fields shown in the show policy-engine application classifier display.
classifier Displays information about the specified application classifier. If no
classifier is specified, this command displays information about all
classifiers. Every application classifier with a single match is displayed in
one line.
app-classifier (Optional) Name of an application classifier. The name should not exceed
30 characters.
dynamic Shows the application dynamic match information.
name Shows the application names list.
Ta b l e 3-48 Field Descriptions for the show policy-engine application classifier Command
Field Description
Number of Application Classifiers: Number of application classifiers configured.
0 to N Numbered list that includes the application name and the match
statement that defines which traffic is interesting. For example:
0) AFS
match dst port range 7000 7009
1) Altiris-CarbonCopy
match dst port eq 1680