Specifications

3-121
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 3 CLI Commands
show logging
show logging
To display the system message log configuration for a WAAS device, use the show logging EXEC
command.
show logging
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values
Command Modes EXEC
Device Modes application-accelerator
central-manager
Usage Guidelines Use the system message log to view information about events that have occurred on a WAAS device. The
syslog.txt file is contained in the /local1 directory.
Examples The following example displays the syslog host configuration on a WAAS device:
WAE# show logging
Syslog to host is disabled
Priority for host logging is set to: warning
Syslog to console is disabled
Priority for console logging is set to: warning
Syslog to disk is enabled
Priority for disk logging is set to: notice
Filename for disk logging is set to: /local1/syslog.txt
Syslog facility is set to *
Syslog disk file recycle size is set to 1000000
Related Commands clear
(config) logging
show sysfs