Specifications

3-111
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 3 CLI Commands
show interface
show interface
To display the hardware interface information for a WAAS device, use the show interface EXEC
command.
show interface {GigabitEthernet slot/port} | {ide control_num} | {InlineGroup slot/grpnumber}
| {InlinePort slot/grpnumber/{lan | wan}} | {PortChannel port-num} | {scsi device_num}
| {Standby group_num | usb}
Syntax Description
Defaults No default behavior or values
Command Modes EXEC
Device Modes application-accelerator
central-manager
GigabitEthernet Displays the Gigabit Ethernet interface device information (only on suitably
equipped systems).
slot/port Slot and port number for the Gigabit Ethernet interface. The slot range is
0–3; the port range is 0–3. The slot number and port number are separated
with a forward slash character (/).
ide Displays the IDE interface device information.
control_num IDE controller number (0–1).
InlineGroup Displays the inline group information.
slot/grpnumber Slot and inline group number for the selected interface.
InlinePort Displays the inline port information.
slot/grpnumber/ Slot and inline group number for the selected interface.
lan Displays the inline port information for the LAN port.
wan Displays the inline port information for the WAN port.
PortChannel Displays the port channel interface device information.
port-num Port number for the port channel interface (1–2).
scsi Displays the SCSI interface device information.
device_num SCSI device number (0–7).
Standby Displays the standby group information.
group_num Standby group number (1–4).
usb Displays the USB interface device information.