Specifications

3-103
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 3 CLI Commands
show disks
SMART support is vendor dependent; each disk vendor has a different set of supported SMART
attributes.
Table 3-31 describes some typical fields in the show disks SMART-info display.
Table 3-32 describes the fields in the show disks SMART-info details display. Details in this display
depend on the drive manufacturer and vary between drives.
Software RAID devices If present, lists the software RAID devices and provides the
following information for each:
Device name Path to the partition on the disk. The partition name “md1”
indicates that the partition is a raided partition and that the RAID
type is RAID-1. (RAID-1 is the only RAID type supported in
WAA S. )
Type Type of RAID, for example RAID-1.
Status Operational status of the RAID device. Status may contain
NORMAL OPERATION or REBUILDING.
Physical devices and status Disk number and operational status of the disk, such as [GOOD]
or [BAD].
Table 3-30 Field Descriptions for the show disks details Command (continued)
Field Description
Ta b l e 3-31 Field Descriptions for the show disks SMART-info Command
Field Description
disk00—disk05 WAE 7300 series appliances show information for 6 disk drives,
and WAE 500 and 600 series appliances show information for 2
disk drives.
Device Vendor number and version number of the disk.
Serial Number Serial number for the disk.
Device type Type of device is disk.
Transport protocol Physical layer connector information, for example: Parallel SCSI
(SPI-4).
Local time is Day of the week, month, date, time hh:mm:ss, year, clock
standard. For example, Mon Mar 19 23:33:12 2007 UTC.
Device supports SMART and
is Enabled
Status of SMART support: Enabled or Disabled.
Temperature Warning Enabled Temperature warning status: Enabled or Disabled.
SMART Health Status: Health status of the disk: OK or Failed.
Ta b l e 3-32 Field Descriptions for the show disks SMART-info details Command
Field Description
disk00—disk05 WAE 7300 series appliances show information for 6 disk
drives and WAE 500 and 600 series appliances show
information for 2 disk drives.
Device Vendor number and version number of the disk.