Specifications

3-87
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 3 CLI Commands
show cdp
show cdp
To display CDP configuration information, use the show cdp EXEC command.
show cdp [entry neighbor [protocol | version [protocol]] | holdtime | interface [FastEthernet
slot/port | GigabitEthernet slot/port] | neighbors [detail | FastEthernet slot/port [detail] |
GigabitEthernet slot/port [detail]] | run | timer | traffic]
Syntax Description
Defaults No default behavior or values
Command Modes EXEC
Device Modes application-accelerator
central-manager
entry (Optional) Displays information for a specific neighbor entry.
neighbor Name of CDP neighbor entry.
protocol (Optional) Displays the CDP protocol information.
version (Optional) Displays the CDP version.
holdtime (Optional) Displays length of time that CDP information is held by
neighbors.
interface (Optional) Displays interface status and configuration.
FastEthernet (Optional) Displays Fast Ethernet configuration.
slot/port Fast Ethernet slot (0–3) and port number.
GigabitEthernet (Optional) Displays Gigabit Ethernet configuration.
slot/port Gigabit Ethernet slot (1–2) and port number.
neighbors (Optional) Displays CDP neighbor entries.
detail (Optional) Displays detailed neighbor entry information.
FastEthernet (Optional) Displays neighbor Fast Ethernet information.
slot/port Neighbor Fast Ethernet slot (0–3) and port number.
detail Displays detailed neighbor Fast Ethernet network information.
GigabitEthernet (Optional) Displays neighbor Gigabit Ethernet information.
slot/port Neighbor Gigabit Ethernet slot (1–2) and port number.
detail (Optional) Displays detailed Gigabit Ethernet neighbor network
information.
run (Optional) Displays the CDP process status.
timer (Optional) Displays the time when CDP information is resent to neighbors.
traffic (Optional) Displays CDP statistical information.