Specifications

3-84
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 3 CLI Commands
show auto-register
show auto-register
To display the status of a WAE’s automatic registration feature, use the show auto-register EXEC
command.
show auto-register
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values
Command Modes EXEC
Device Modes application-accelerator
Examples Table 3-8 describes the output in the show auto-register display.
Related Commands (config) auto-register
Ta b l e 3-8 Field Description for the show auto-register Command
Field Description
Auto registration is enabled. Configuration status of the autoregistration feature.
Auto registration is disabled.