Specifications

3-80
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 3 CLI Commands
show alarms
Related Commands (config) alarm overload-detect
(config) snmp-server enable traps
Device is NOT in alarm overload
state.
Status of the device alarm overload state.
Device enters alarm overload state
@ 999 alarms/sec.
Threshold number of alarms per second at which the device
enters the alarm overload state.
Device exits alarm overload state @
99 alarms/sec.
Threshold number of alarms per second at which the device
exits the alarm overload state.
Overload detection is ENABLED. Status of whether overload detection is enabled on the device.
Table 3-4 Field Descriptions for the show alarms status Command (continued)
Field Description