Specifications

3-77
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 3 CLI Commands
show adapter
show adapter
To display the status and configuration of the EndPoint Mapper (EPM) adapter, use the show adapter
EXEC command.
show adapter epm
Syntax Description
Defaults No default behavior or values
Command Modes EXEC
Device Modes application-accelerator
Usage Guidelines This command is valid for the WAE application-accelerator appliances; it is not valid for the Central
Manager (CM) appliance.
Examples Table 3-2 describes the fields shown in the show adapter epm display.
Related Commands (config) adapter
show statistics epm
epm Specifies the Microsoft PortMapper adapter.
Ta b l e 3-2 Field Description for the show adapter epm Command
Field Description
EPM (MS-PortMapper) adapter is
enabled.
Configuration status of the EPM adapter.
EPM (MS-PortMapper) adapter is
disabled.