Specifications

3-61
Cisco Wide Area Application Services Command Reference
OL-11817-01
Chapter 3 CLI Commands
ntpdate
ntpdate
To set the software clock (time and date) on a WAAS device using a NTP server, use the ntpdate EXEC
command.
ntpdate {hostname | ip-address}
Syntax Description
Defaults No default behavior or values
Command Modes EXEC
Device Modes application-accelerator
central-manager
Usage Guidelines Use NTP to find the current time of day and set the current time on the WAAS device to match. The time
must be saved to the hardware clock using the clock save command if it is to be restored after a reload.
Examples The following example shows how to set the software clock on the WAAS device using a NTP server:
WAE# ntpdate 10.11.23.40
Related Commands clock
(config) clock
show clock
show ntp
hostname NTP hostname.
ip-address NTP server IP address.