Specifications

3-29
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 3 CLI Commands
configure
configure
To enter global configuration mode, use the configure EXEC command. You must be in global
configuration mode to enter global configuration commands.
configure
To exit global configuration mode, use the end or exit commands. You can also press Ctrl-Z to exit from
global configuration mode.
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values.
Command Modes EXEC
Device Modes application-accelerator
central-manager
Examples The following example shows how to enable global configuration mode on a WAAS device:
WAE# configure
WAE(config)#
Related Commands (config) end
(config) exit
show running-config
show startup-config