Specifications

3-571
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 3 CLI Commands
(config) wccp tcp-promiscuous router-list-num
Usage Guidelines To configure the egress method for WCCP intercepted connections, use the egress-method global
configuration command.
Note WCCP works with IPv4 networks only.
Examples The following example shows how to turn on the TCP promiscuous mode service and associate this
service with the router list:
WAE # wccp tcp-promiscuous router-list-num 1
WCCP configuration for TCP Promiscuous service 61 succeeded.
WCCP configuration for TCP Promiscuous succeeded.
Please remember to configure WCCP service 61 and 62 on the corresponding router.
Related Commands (config) egress-method
(config) wccp router-list
show wccp