Specifications

3-547

Cisco Wide Area Application Services Command Reference

OL-16451-01

Chapter 3 CLI Commands

(config) tfo tcp keepalive

To configure a WAE for Traffic Flow Optimization (TFO) with TCP keepalives, use the tfo tcp keepalive

global configuration command. To disable TFO TCP keepalives, use the no form of this command.

tfo tcp keepalive

no tfo tcp keepalive

Syntax Description This command has no arguments or keywords.

Defaults Keepalives are disabled by default.

Command Modes global configuration

Device Modes application-accelerator

Usage Guidelines This command enables TCP keepalives on the TFO optimized sockets (the connection between two peer

WA Es ).

Examples The following example shows how to configure a WAE for Traffic Flow Optimization with TCP

keepalives using the tfo tcp keepalive command:

WAE(config)# tfo tcp keepalive

Related Commands (config) tfo tcp optimized-mss

(config) tfo tcp optimized-receive-buffer

(config) tfo tcp optimized-send-buffer

(config) tfo tcp original-mss

(config) tfo tcp original-receive-buffer

(config) tfo tcp original-send-buffer