Specifications

3-542
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 3 CLI Commands
(config) telnet enable
(config) telnet enable
To enable Telnet on a WAAS device, use the telnet enable global configuration command. To disable
this feature, use the no form of this command.
telnet enable
no telnet enable
Syntax Description This command has no arguments or keywords.
Defaults By default, the Telnet service is enabled on a WAAS device.
Command Modes global configuration
Device Modes application-accelerator
central-manager
Usage Guidelines Use terminal emulation software to start a Telnet session with a WAAS device.
You must use a console connection instead of a Telnet session to define device network settings on the
WAAS device. However, after you have used a console connection to define the device network settings,
you can use a Telnet session to perform subsequent configuration tasks.
Note Messages transported between the client and the device are not encrypted.
Examples The following example shows how to enable the use of Telnet on the WAAS device:
WAE(config)# telnet enable
Related Commands telnet
show telnet