Specifications

3-531
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 3 CLI Commands
(config) snmp-server user
Examples The following example shows how to create an SNMPv3 user account on the WAAS device. The
SNMPv3 user is named acme and belongs to the group named admin. Because this SNMP user account
has been set up with no authentication password, the SNMP agent on the WAAS device does not perform
authentication on SNMP requests from this user.
WAE(config)# snmp-server user acme admin
Related Commands (config) snmp-server community
(config) snmp-server contact
(config) snmp-server enable traps
(config) snmp-server group
(config) snmp-server host
(config) snmp-server location
(config) snmp-server mib
(config) snmp-server notify inform
(config) snmp-server view
snmp trigger