Specifications

3-502
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 3 CLI Commands
(config) policy-engine application set-dscp
Examples The following example shows how to set the default DSCP marking value to copy:
WAE(config)# policy-engine application set-dscp copy
Related Commands (config) policy-engine application name
af43 Sets packets with AF43 dscp (100110).
cs1 Sets packets with CS1 (precedence 1) dscp (001000).
cs2 Sets packets with CS2 (precedence 2) dscp (010000).
cs3 Sets packets with CS3 (precedence 3) dscp (011000).
cs4 Sets packets with CS4 (precedence 4) dscp (100000).
cs5 Sets packets with CS5 (precedence 5) dscp (101000).
cs6 Sets packets with CS6 (precedence 6) dscp (110000).
cs7 Sets packets with CS7 (precedence 7) dscp (111000).
copy Copies the DSCP value from the incoming packet to the outgoing packet. (default)
default Sets packets with default dscp (000000).
ef Sets packets with EF dscp (101110).
Table 3-119 DSCP Marking Values (continued)
DSCP Code Description