Specifications

3-480
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 3 CLI Commands
(config) logging facility
(config) logging facility
To set the facility parameter for system logging, use the logging facility global configuration command.
To disable logging functions, use the no form of this command.
logging facility facility
no logging facility facility
Syntax Description
Defaults Logging: on
Command Modes global configuration
Device Modes application-accelerator
central-manager
Examples The following example shows how to set the facility parameter to authorization system for syslog
messages:
WAE(config)# logging facility auth
facility facility Sets the facility parameter for syslog messages. Use one of the following
keywords:
• auth—Authorization system
• daemon—System daemons
• kernel—Kernel
• local0—Local use
• local1—Local use
• local2—Local use
• local3—Local use
• local4—Local use
• local5—Local use
• local6—Local use
• local7—Local use
• mail—Mail system
• news—USENET news
• syslog—Syslog itself
• user—User process
• uucp—UUCP system