Specifications

3-466
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 3 CLI Commands
(config) interface Standby
(config) interface Standby
To configure a standby interface, use the interface global configuration command. To disable selected
options, restore default values, or enable a shutdown interface, use the no form of this command.
interface Standby grpnumber {description text | errors max-error-number | ip ip_address |
no {description text | errors max-error-number | ip ip_address | shutdown}| shutdown}
no interface Standby grpnumber {description text | errors max-error-number | ip ip_address |
no {description text | errors max-error-number | ip ip_address | shutdown}| shutdown}
Syntax Description
Defaults No default behavior or values.
Command Modes global configuration
Device Modes application-accelerator
central-manager
Related Commands show interface
show running-config
show startup-config
Standby grpnumber Sets the standby group number (1–4).
description text Enters a description of the interface.
errors
max-error-number
Specifies the maximum number of errors.
ip ip_address Specifies the IP address of the interface.
shutdown Shuts down this interface.