Specifications

2-17
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 2 Cisco WAAS Software Command Summary
(config) transaction-logs Configures the transaction logging on a WAE. global configuration application-
accelerator
type Displays a file. user-level EXEC and
privileged-level EXEC
All
type-tail Displays the last several lines of a file. user-level EXEC and
privileged-level EXEC
All
(config) username Establishes the username authentication. global configuration All
virtual-blade Executes general operations on a virtual
blade.
privileged-level EXEC application-
accelerator
(config) virtual-blade Configures virtual blades on your WAE
device.
global configuration All
wafs Performs a backup or restores system
configuration, and creates a system report on
a WAE.
privileged-level EXEC application-
accelerator
(config) wccp access-list Configures the IP access list for inbound Web
Cache Coordination Protocol (WCCP)
GRE-encapsulated traffic on a WAE.
global configuration application-
accelerator
(config) wccp flow-redirect Enables the WCCP flow redirection on a
WAE .
global configuration application-
accelerator
(config) wccp router-list Creates a router list on a WAE for use in the
WCCP Version 2 services.
global configuration application-
accelerator
(config) wccp shutdown Sets the maximum time interval after which
the WAE will perform a clean shut down.
global configuration application-
accelerator
(config) wccp
tcp-promiscuous mask
Configures the TCP promiscuous mode
service (WCCP Version 2 services 61 and 62)
on a WAE.
global configuration application-
accelerator
(config) wccp
tcp-promiscuous
router-list-num
Configures the TCP promiscuous mode
service (WCCP Version 2 services 61 and 62)
router list on a WAE.
global configuration application-
accelerator
(config) wccp version Specifies the WCCP version number. global configuration application-
accelerator
whoami Displays the name of the current user. user-level EXEC and
privileged-level EXEC
All
windows-domain Accesses Windows domain utilities. privileged-level EXEC All
(config) windows-domain Configures Windows domain server options. global configuration All
write Writes or erases the startup configurations to
NVRAM or to a terminal session, or writes the
MIB persistence configuration to disk.
privileged-level EXEC All
Table 2-1 Command Summary (continued)
Command Description CLI Mode Device Mode