Specifications

3-446
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 3 CLI Commands
(config) end
(config) end
To exit global configuration mode, use the end global configuration command.
end
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values.
Command Modes global configuration
Device Modes application-accelerator
central-manager
Usage Guidelines Use the end command to exit global configuration mode after completing any changes to the running
configuration. To save new configurations to NVRAM, use the write command.
In addition, you can press Ctrl-Z to exit global configuration mode.
Examples The following example shows how to exit global configuration mode on a WAAS device:
WAE(config)# end
WAE#
Related Commands (config) exit