Specifications

3-443

Cisco Wide Area Application Services Command Reference

OL-16451-01

Chapter 3 CLI Commands

(config) disk logical shutdown

To shut down the RAID-5 logical disk drive, use the disk logical shutdown global configuration

command. To reenable the RAID-5 logical disk drive, use the no form of this command.

disk logical shutdown

no disk logical shutdown

Syntax Description This command has no arguments or keywords.

Defaults The RAID-5 array is configured by default.

Command Modes global configuration

Device Modes application-accelerator

Usage Guidelines This command is supported on WAE-7341 and WAE-7371 models only.

Use this command to operate the WAE-7341 or WAE-7371 in diskless mode. In diskless mode, the

partitions and disks are not mounted and cannot be used.

You must reload the device for this command to take effect.

Examples The following example shows how shutdown the RAID-5 logical disk drive using the disk logical

shutdown command:

WAE(config)# disk logical shutdown

Related Commands (config) disk disk-name