Specifications

3-438
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 3 CLI Commands
(config) disk disk-name
(config) disk disk-name
To disable the disk for online removal, use the disk disk-name global configuration command. To
reenable the disk, use the no form of this command.
disk disk-name diskxx shutdown [force]
no disk disk-name diskxx shutdown [force]
Syntax Description
Defaults Disks are enabled.
Command Modes global configuration
Device Modes application-accelerator
central-manager
Usage Guidelines This command is not available on the WAE-7341 and WAE-7371 models. Instead, use the disk
disk-name diskxx replace EXEC mode command.
You can replace a failed disk or perform a scheduled disk maintenance on the WAE-612 and WAE-7326.
Use the disk disk-name diskxx shutdown global configuration command to manually shut down a disk
for a scheduled disk maintenance, or on the WAE-7341 and WAE-7371, use the disk disk-name diskxx
replace EXEC command to manually shut down a disk for scheduled disk maintenance. (For the
schedule disk maintenance procedure, see the Cisco Wide Area Application Services Configuration
Guide, Chapter 14.)
Note The show disks failed-disk-id EXEC command is not available on WAE-7341 and WAE-7371 models.
Examples The following example shows how to disable disk00 for online removal using the disk disk-name
command:
WAE(config)# disk disk-name disk00 shutdown
Related Commands (config) disk error-handling
diskxx Name of the disk (disk00-disk05).
shutdown Disables the disk for maintenance.
force (Optional) Forces a disk to be reenabled when used with the no form of this
command.
This option is not available on RAID-5 systems.