Specifications

2-9
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 2 Cisco WAAS Software Command Summary
(config-std-nacl) permit Adds a line to a standard access list that
specifies the type of packets that you want the
WAAS device to permit for further
processing.
standard ACL
configuration
All
(config-ext-nacl) permit Adds a line to an extended access list that
specifies the type of packets that you want the
WAAS device to permit for further
processing.
extended ACL
configuration
All
ping Sends the echo packets. user-level EXEC and
privileged-level EXEC
All
(config) policy-engine
application classifier
Defines a WAE’s application policy and
assigns the policy a name, a classifier, and a
policy map.
global configuration application-
accelerator
(config) policy-engine
application map adaptor
EPM
Configures a WAE’s application policy with
advanced policy map lists of the EndPoint
Mapper (EPM) service.
global configuration application-
accelerator
(config) policy-engine
application map adaptor
WAF S tra ns p o rt
Configures a WAE’s application policies with
the WAFS transport option.
global configuration application-
accelerator
(config) policy-engine
application map basic
Deletes a specific basic (static) application
policy map from the WAE’s list of application
policy maps.
global configuration application-
accelerator
(config) policy-engine
application map other
optimize DRE
Configures the WAE’s optimize DRE
command action for nonclassified traffic.
global configuration application-
accelerator
(config) policy-engine
application map other
optimize full
Configures the application policy for
nonclassified traffic with the optimize full
command action.
global configuration application-
accelerator
(config) policy-engine
application map other
pass-through
Configures the application policy for
nonclassified traffic with the pass-through
command action.
global configuration application-
accelerator
(config) policy-engine
application name
Creates a new application definition that
specifies general information about an
application.
global configuration application-
accelerator
(config) policy-engine
application set-dscp
Sets the default DSCP marking value. global configuration application-
accelerator
(config) policy-engine
config
Removes all of the application policy
configuration or restores the application
policy factory defaults on a WAE.
global configuration application-
accelerator
(config) port-channel Configures the port channel load-balancing
options.
global configuration All
(config) primary-interface Configures a primary interface for the WAAS
device.
global configuration All
Table 2-1 Command Summary (continued)
Command Description CLI Mode Device Mode