Specifications

2-7
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 2 Cisco WAAS Software Command Summary
(config-preposition)
ignore-hidden-dir
Configures to ignore hidden directories in the
set of files to be prepositioned.
preposition
configuration
application-
accelerator
(config) inetd Enables FTP, RCP, and TFTP services. global configuration All
(config-if) inline Configures inline interception for an
inlineGroup interface.
interface configuration All
(config) inline
vlan-id-connection-check
Enables VLAN ID checking on intercepted
traffic.
global configuration All
install Installs a new image into Flash memory. privileged-level EXEC All
(config-vb) interface Bridges a virtual blade interface to an
interface on your WAE.
virtual blade
configuration
application-
accelerator
(config) interface
GigabitEthernet*
Configures a Gigabit Ethernet interface.
Provides access to interface configuration
mode.
global configuration All
(config) interface
InlineGroup*
Configures a Inline Group channel, or standby
interface. Provides access to interface
configuration mode.
global configuration All
(config) interface
PortChannel*
Configures a port channel interface. Provides
access to interface configuration mode.
global configuration All
(config) interface Standby* Configures a standby interface. Provides
access to interface configuration mode.
global configuration All
(config) ip Configures the initial network device
configuration settings (for example, the IP
address of the default gateway) on a WAAS
device.
global configuration All
(config-if) ip Configures the IP address, subnet mask, or
DHCP IP address negotiation on the interface
of the WAAS device or Cisco WAE Inline
Network Adapter.
interface configuration All
(config-if) ip access-group Controls the connections on a specific
interface by applying a predefined access list.
interface configuration All
(config) ip access-list* Creates and modifies the access lists for
controlling access to interfaces or
applications. Provides access to ACL
configuration mode.
global configuration All
(config) kerberos Configures user authentication against a
Kerberos database.
global configuration All
(config) kernel Enables the kernel debugger configuration
mode.
global configuration All
less Displays the contents of a file using the LESS
application.
user-level EXEC and
privileged-level EXEC
All
license add Adds a software license. privileged-level EXEC All
(config) line Specifies the terminal line settings. global configuration All
Table 2-1 Command Summary (continued)
Command Description CLI Mode Device Mode