Specifications

3-352
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 3 CLI Commands
snmp trigger
snmp trigger
To configure thresholds for a user-selected MIB object for monitoring purposes on a WAAS device, use
the snmp trigger EXEC command.
snmp trigger {create mibvar [wildcard] [wait-time [
absent [LINE | mibvar1 mibvar1] [LINE | mibvar2 mibvar2] [LINE | mibvar3 mibvar3]
[LINE] |
equal [absolute value [[LINE | mibvar1 mibvar1] [LINE | mibvar2 mibvar2] [LINE | mibvar3
mibvar3] [LINE] | delta value [LINE | mibvar1 mibvar1] [LINE | mibvar2 mibvar2]
[LINE | mibvar3 mibvar3] [LINE]] |
falling [absolute value [LINE | mibvar1 mibvar] [LINE | mibvar2 mibvar2] [LINE | mibvar3
mibvar3] [LINE] | delta value [LINE | mibvar1 mibvar1] [LINE | mibvar2 mibvar2]
[LINE | mibvar3 mibvar3] [LINE]] |
greater-than [absolute value [LINE | mibvar1 mibvar1] [LINE | mibvar2 mibvar2]
[LINE | mibvar3 mibvar3] [LINE] | delta value [LINE | mibvar1 mibvar1]
[LINE | mibvar2 mibvar2] [LINE | mibvar3 mibvar3] [LINE]] |
less-than [absolute value [LINE | mibvar1 mibvar1] [LINE | mibvar2 mibvar2]
[LINE | mibvar3 mibvar3] [LINE] | delta value [LINE | mibvar1 mibvar1] [LINE | mibvar2
mibvar2] [LINE | mibvar3 mibvar3] [LINE]] |
on-change [[LINE | mibvar1 mibvar1][LINE | mibvar2 mibvar2] [LINE | mibvar3 mibvar3]
[LINE]] |
present [LINE | mibvar1 mibvar1] [LINE | mibvar2 mibvar2] [LINE | mibvar3 mibvar3]
[LINE] |
rising [absolute value [LINE | mibvar1 mibvar1] [LINE | mibvar2 mibvar2]
[LINE | mibvar3 mibvar3] [LINE] | delta value [LINE | mibvar1 mibvar1]
[LINE | mibvar2 mibvar2] [LINE | mibvar3 mibvar3] [LINE]]]]}
snmp trigger delete mibvar
Syntax Description create mibvar Configures a threshold for a MIB object. Specifies the name of the MIB
object that you want to monitor or the MIB object for which you want to
remove a monitoring threshold.
wildcard (Optional) Treats the specified MIB variable name as having a wildcard.
wait-time (Optional) Number of seconds, 60–600, to wait between trigger samples.
absent (Optional) Applies the absent existence test.
LINE (Optional) Description of the threshold being created.
mibvar1 mibvar1 (Optional) Adds a MIB object to the notification.
mibvar2 mibvar2 (Optional) Adds a MIB object to the notification.
mibvar3 mibvar3 (Optional) Adds a MIB object to the notification.
equal Applies the equality threshold test.
absolute value (Optional) Specifies an absolute value sample type.