Specifications

3-289
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 3 CLI Commands
show statistics icmp
show statistics icmp
To display ICMP statistics for a WAAS device, use the show statistics icmp EXEC command.
show statistics icmp
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values.
Command Modes EXEC
Device Modes application-accelerator
central-manager
Examples Table 3-92 describes the fields shown in the show statistics icmp command display.
Table 3-92 Field Descriptions for the show statistics icmp Command
Field Description
ICMP messages received Total number of Internet Control Message Protocol (ICMP)
messages which the entity received, including all those counted
as ICMP input errors.
ICMP messages receive failed Number of ICMP messages which the entity received but
determined as having ICMP-specific errors, such as bad ICMP
checksums, bad length, and so forth.
Destination unreachable Number of ICMP messages of this type received.
Timeout in transit Number of ICMP messages of this type received.
Wrong parameters Number of ICMP messages of this type received.
Source quenches Number of ICMP messages of this type received.
Redirects Number of ICMP messages of this type received.
Echo requests Number of ICMP messages of this type received.
Echo replies Number of ICMP messages of this type received.
Timestamp requests Number of ICMP messages of this type received.
Timestamp replies Number of ICMP messages of this type received.
Address mask requests Number of ICMP messages of this type received.
Address mask replies Number of ICMP messages of this type received.