Specifications

3-284
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 3 CLI Commands
show statistics filtering
show statistics filtering
To display statistics about the incoming and outgoing TFO flows that the WAE currently has, use the
show statistics filtering EXEC command.
show statistics filtering
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values.
Command Modes EXEC
Device Modes application-accelerator
Usage Guidelines The show statistics filtering command displays statistics about the TCP flows that the WAE is handling.
Examples The following is sample output from the show statistics filtering command. It displays TFO connection
statistics for the WAE.
WAE# show statistics filtering
Number of filtering tuples: 1
Packets dropped due to ttl expiry: 0
Packets dropped due to bad route: 0
Syn packets dropped with our own id in the options: 0
Internal client syn packets dropped: 0
Syn packets received and dropped on estab. conn: 0
Syn-Ack packets received and dropped on estab. conn: 0
Packets recvd on in progress conn. and not handled: 0
Packets dropped due to peer connection alive: 0
Packets dropped due to invalid TCP flags: 0
Packets dropped by FB packet input notifier: 0
Packets dropped by FB packet output notifier: 0
Number of errors by FB tuple create notifier: 0
Number of errors by FB tuple delete notifier: 0
Dropped WCCP GRE packets due to invalid WCCP service: 0
Dropped WCCP L2 packets due to invalid WCCP service: 0
Related Commands show filtering list
show statistics auto-discovery
show statistics connection closed