Specifications

3-275
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 3 CLI Commands
show statistics connection egress-methods
Each time a packet enters the connection tuple, the intercepting device IP address or MAC address is
recorded. The updates field in the command output indicates whether the intercepting device IP address
or intercepting device MAC address has been recorded. If, for example, the ID MAC address updates
field is zero (0), the MAC address was not recorded, and the ID MAC address field will be blank. The
recorded intercepting device information is used when a packet egresses from the WAE.
If the egress method for the connection tuple is IP forwarding, the updates fields are always zero (0)
because the intercepting device information is neither required nor recorded for the IP forwarding egress
method.
If the intercept method is WCCP GRE redirect and the egress method is WCCP GRE, only the IP address
field is updated and recorded. The MAC address information is neither required nor recorded because
the destination address in the GRE header only accepts an IP address.
If the intercept method is WCCP L2 redirect and the egress method is WCCP GRE, both the MAC
address and the IP address fields are updated and recorded because incoming WCCP L2 packets contain
only a MAC header. The MAC address is recorded and the intercepting device IP address is derived from
Table 3-84 Field Descriptions for the show tfo egress-methods connection Command
Field Description
TUPLE
Client-IP:Port IP address and port number of the client device in the
connection tuple.
Server-IP:Port IP address and port number of the server device in the
connection tuple.
MATE
Client-IP:Port IP address and port number of the client device in the
mate connection tuple.
Server-IP:Port IP address and port number of the server device in the
mate connection tuple.
Egress method Egress method being used.
WCCP Service | Bucket WCCP service number and bucket number for the
connection tuple and mate connection tuple.
Tuple Flags Flags for intercept method and intercept mechanism.
This field may contain the following values: WCCP or
NON-WCCP as the intercept method; L2 or GRE as the
intercept mechanism; or PROT showing whether this
tuple is receiving packets through the flow protection
mechanism.
Intercepting device (ID)
ID IP address IP address of the intercepting device.
ID MAC address MAC address of the intercepting device.
ID IP address updates Number of IP address changes for the intercepting
device.
ID MAC address updates Number of MAC address changes for the intercepting
device.
Memory address Memory address.