Specifications

3-271
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 3 CLI Commands
show statistics connection conn-id
Directed Mode State of directed mode: true (on) or false (off).
Configured Policy Name of the configured application policy.
Derived Policy Named of the derived application policy.
Peer Policy Name of the application policy on the peer side.
Negotiated Policy Name the negotiated application acceleration policy.
Accelerators Accelerators currently in use on the connection.
Original and Optimized Bytes
Read/Written
Number of bytes that have been rear and written on the original
(incoming) side and the optimized (outgoing) side.
DRE Stats
Encode Statistics for compressed messages.
Overall: [msg | in | out | ratio] Aggregated statistics for compressed messages.
msg = Total number of messages.
in = Number of bytes before decompression.
out = Number of bytes after decompression.
ratio = Percentage of the total number of bytes that were
compressed.
DRE: [msg | in | out | ratio] Number of DRE messages.
DRE Bypass: [msg | in] Number of DRE messages that were bypassed for compression.
LZ: [msg | in | out | ratio] Number of LZ messages.
Avg Latency Average latency (transmission delay) of the DRE traffic.
Encode Th-put Speed of DRE traffic throughput, in kilobytes per second.
Message Size Distribution Percentage of total messages that fall within indicated size
ranges.
Connection Details
Chunks Number of chunks encoded, decode, and anchored (forced).
Total Messages Total number of messages processed and the number of blocks
used per message.
Ack [msg | size] Number and size of acknowledgement messages.
Encode Bypass Due To Reason for previous traffic encoding bypass.
Nack Number and size of negative acknowledgement messages.
R-tx Number of ready-to-transmit messages.
Aggregation Encode/Decode Aggregated statistics for compressed messages.
TFO Stats
Conn-Type Type of connection.
Policy Policy in use on connection.
EOT State [write | req | ack | read |
ack]
End of transmission state for data written and read.
Table 3-83 Field Descriptions for the show statistics connection conn-id Command (continued)
Field Description