Specifications

3-256
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 3 CLI Commands
show statistics accelerator
Related Commands clear arp-cache
show accelerator
show statistics connection closed
Rejected Connection Counts Due To:
(Total:)
• The number of all of the reject reasons which
represent hits that were not able to use the
accelerator applications. Reject reasons include the
following:
• Not registered
• Keepalive timeout
• No license
• Load level not within range
• Connection limit exceeded
• Rate limit exceeded (a new connection exceeded the
number of connections allowed within the timie
window)
• Minimum TFO not available
• Resource manager (minimum resources not
available)
• Global config optimization disabled
• TFO limit exceeded (systemwide connection limit
reached)
• Server-side invoked
• DM deny (Policy Engine dynamic match deny rule
matched)
• No DM accept was matched
Auto-Discovery Statistics
Connections queued for accept Number of connections added to the AO connection
accept queue by Auto Discovery.
Accept queue add failures Number of connections that could not be added to the AO
connection accept queue due to a failure. The failure
could possibly be due to AO not being present, or a queue
overflow.
AO discovery successful For the AOs that work in dual-ended mode, AO discovery
(as part of Auto Discovery) is performed. This counter
indicates the number of times AO discovery was
successful.
AO discovery failure The number of times AO discovery failed. Possible
reasons include AO not being enabled or running on the
peer WAE, or the license not configured for the AO.
Table 3-75 Field Descriptions for the show statistics accelerator video detail Command
Field Description