Specifications

3-246
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 3 CLI Commands
show statistics accelerator
Updated Released Number of hits that were released during Auto-Discovery
and did not make use of the accelerator application.
Active Connections Number of hits that represent either active connections
using the accelerator application or connections that are
still in the process of performing Auto-Discovery.
Completed Connections Number of hits that have made use of the accelerator
application and have completed.
Drops Number of hits that attempted use of the accelerator
application but were rejected for some reason. A separate
hit and drop will be tallied for each TCP SYN packet
received for a connection. This includes the original SYN
and any retries.
Rejected Connection Counts Due To:
(Total:)
• The number of all of the reject reasons which
represent hits that were not able to use the
accelerator applications. Reject reasons include the
following:
• Not registered
• Keepalive timeout
• No license
• Load level not within range
• Connection limit exceeded
• Rate limit exceeded (a new connection exceeded the
number of connections allowed within the timie
window)
• Minimum TFO not available
• Resource manager (minimum resources not
available)
• Global config optimization disabled
• TFO limit exceeded (systemwide connection limit
reached)
• Server-side invoked
• DM deny (Policy Engine dynamic match deny rule
matched)
• No DM accept was matched
Auto-Discovery Statistics
Connections queued for accept Number of connections added to the AO connection
accept queue by Auto Discovery.
Accept queue add failures Number of connections that could not be added to the AO
connection accept queue due to a failure. The failure
could possibly be due to AO not being present, or a queue
overflow.
Table 3-72 Field Descriptions for the show statistics accelerator http Command (continued)
Field Description