Specifications
3-243
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 3 CLI Commands
show statistics accelerator
Table 3-72 describes the fields shown in the show statistics accelerator http command display.
Rejected Connection Counts Due To:
(Total:)
• The number of all of the reject reasons which represent hits
that were not able to use the accelerator applications.
Reject reasons include the following:
• Not registered
• Keepalive timeout
• No license
• Load level not within range
• Connection limit exceeded
• Rate limit exceeded (a new connection exceeded the
number of connections allowed within the time window)
• Minimum TFO not available
• Resource manager (minimum resources not available)
• Global config optimization disabled
• TFO limit exceeded (systemwide connection limit reached)
• Server-side invoked
• DM deny (Policy Engine dynamic match deny rule
matched)
• No DM accept was matched
Auto-Discovery Statistics
Connections queued for accept Number of connections added to the AO connection accept
queue by Auto Discovery.
Accept queue add failures Number of connections that could not be added to the AO
connection accept queue due to a failure. The failure could
possibly be due to AO not being present, or a queue overflow.
AO discovery successful For the AOs that work in dual-ended mode, AO discovery (as
part of Auto Discovery) is performed. This counter indicates
the number of times AO discovery was successful.
AO discovery failure The number of times AO discovery failed. Possible reasons
include AO not being enabled or running on the peer WAE, or
the license not configured for the AO.
Table 3-71 Field Descriptions for the show statistics accelerator generic Command (continued)
Field Description
Table 3-72 Field Descriptions for the show statistics accelerator http Command
Field Description
Time Accelerator was started Local time accelerator was started or restarted.
Time Statistics were Last Reset/Cleared Local time accelerator was last started or restarted, or the
clear statistics accelerator [http | all] command was
executed since accelerator was last started or restarted.