Specifications

3-230
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 3 CLI Commands
show snmp
(1): Name for the trigger. This name is locally-unique and
administratively assigned. For example, this field might contain
the “isValid” trigger name. Numbering indicates that this is the
first management trigger listed in the show output.
Comment: Description of the trigger function and use. For example: WAFS
license file is not valid.
Sample: Basis on which the test sample is being evaluated. For example:
Abs (Absolute) or Delta.
Freq: Frequency. Number of seconds to wait between trigger
samplings. To encourage consistency in sampling, the interval
is measured from the beginning of one check to the beginning
of the next and the timer is restarted immediately when it
expires, not when the check completes.
Test: Type of trigger test to perform based on the SNMP trigger
configured. The Test field may contain the following types of
tests:
Absent—Absent existence of a test
Boolean—Boolean value test
Equal—Equality threshold test
Falling—Falling threshold test
Greater-than—Greater-than threshold test
Less-than—Less-than threshold test
On-change—Changed existence test
Present—Present present test
Rising—Rising threshold test
ObjectOwner: Name of the object owner who created the trigger using the
snmp trigger create global configuration command or by
using an SNMP interface. “CLI” is the default owner.
Object: String identifying the object.
Boolean Entry:
Value: Object identifier of the MIB object to sample to see whether the
trigger should fire.
Cmp: Comparison. Type of boolean comparison to perform. The
numbers 1–6 correspond to these Boolean comparisons:
unequal (1)
equal (2)
less (3)
lessOrEqual (4)
greater (5)
greaterOrEqual (6)
Table 3-64 Field Descriptions for the show snmp event Command (continued)
Field Description