Specifications

3-215
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 3 CLI Commands
show policy-engine status
show policy-engine status
To display high-level information about a WAE policy engine, use the show policy-engine status EXEC
command.
show policy-engine status
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values.
Command Modes EXEC
Device Modes application-accelerator
Usage Guidelines The show policy-engine status command displays information inlcuding the usage of the available
resources, which include application names, classifiers, conditions, and service classes.
Examples Table 3-56 describes the fields shown in the show policy-engine status command display.
Related Commands (config) policy-engine application classifier
Table 3-56 Field Descriptions for the show policy-engine status Command
Field Description
Policy-engine resources usage: Table columns are Total, Used, and Available.
Application names Total number of application names. Number of application
names being used. Number of application names available.
Classifiers Total number of classifiers configured. Number of classifiers
being used. Number of classifiers available. The maximum
number of classifiers allowed is 512.
Conditions Total number of conditions configured. Number of conditions
being used. Number of conditions available. The maximum
number of match conditions allowed is 1024.
Policies Total number of policies configured. Number of policies being
used. Number of policies available. The maximum number of
policies allowed is 512.
Service-Classes Total number of service classes configured. Number of service
classes being used. Number of service classes available. The
maximum number of service classes allowed is 256.