Specifications

3-203
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 3 CLI Commands
show ip routes
show ip routes
To display the IP routing table for a WAAS device, use the show ip routes EXEC command.
show ip routes
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values.
Command Modes EXEC
Device Modes application-accelerator
central-manager
Usage Guidelines The show ip routes command displays the IP route table, which lists all of the different routes that are
configured on the WAE. The WAE uses this table to determine the next hop. This table includes routes
from three sources: the WAE GigabitEthernet interfaces, any user-configured static routes, and the
default gateway. The last line in this table shows the default route.
Examples Table 3-48 describes the fields shown in the show ip routes command display.
Related Commands (config) ip
(config-if) ip
Table 3-48 Field Descriptions for the show ip routes Command
Field Description
Destination Destination IP addresses for each route.
Gateway Gateway addresses for each route.
Netmask Netmasks for each route.
Number of route cache entries Number of entries in the route cache.
The route cache is a separate entity and this field is not
associated with the entries in the IP route table. The number of
entries in the route cache can vary depending on the number of
connections that are open.