Specifications

3-200
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 3 CLI Commands
show inventory
show inventory
To display the system inventory information for a WAAS device, use the show inventory EXEC
command.
show inventory
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values.
Command Modes EXEC
Device Modes application-accelerator
central-manager
Usage Guidelines The show inventory EXEC command allows you to view the UDI for a WAAS device. This identity
information is stored in the nonvolatile memory of the WAAS device.
The UDI is electronically accessed by the product operating system or network management application
to enable identification of unique hardware devices. The data integrity of the UDI is vital to customers.
The UDI that is programmed into the nonvolatile memory of the WAAS device is equivalent to the UDI
that is printed on the product label and on the carton label. This UDI is also equivalent to the UDI that
can be viewed through any electronic means and in all customer-facing systems and tools. Currently,
there is only CLI access to the UDI; there is no SNMP access to the UDI information.
You can also use the show tech-support EXEC command to display the WAAS device UDI.
Examples Table 3-46 describes the fields shown in the show inventory command display.
Related Commands show tech-support
Table 3-46 Field Descriptions for the show inventory Command
Field Description
PID Product identification (ID) number of the device.
VID Version ID number of the device. Displays as 0 if the version
number is not available.
SN Serial number of the device.