Specifications

3-198
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 3 CLI Commands
show interface
Table 3-43 describes the fields shown in the show interface PortChannel command display.
Base address Base address. hexidecimal value.
Flags Interface status indicators. Values include Up, Broadcast,
Running, and Multicast.
Mode Speed setting, transmission mode, and transmission speed for
this interface.
Table 3-42 Field Descriptions for the show interface InlinePort Command (continued)
Field Description
Table 3-43 Field descriptions for the show interface PortChannel Command
Field Description
Type Type of interface. Always Ethernet.
Ethernet address Layer-2 MAc address.
Maximum Transfer Unit Size Current configured MTU value.
Metric Metric setting for the interface. The default is 1. The routing
metric is used by the routing protocol. Higher metrics have the
effect of making a route less favorable; metrics are counted as
addition hops to the destination network or host.
Packets Received Total number of packets received by this interface.
Input Errors Number of incoming errors on this interface.
Input Packets Dropped Number of incoming packets that were dropped on this
interface.
Input Packets Overruns Number of incoming packet overrun errors.
Input Packets Frames Number of incoming packet frame errors.
Packet Sent Total number of packets sent from this interface.
Output Errors Number of outgoing packet errors.
Output Packets Dropped Number of outgoing packets that were dropped by this
interface.
Output Packets Overruns Number of outgoing packet overrun errors.
Output Packets Carrier Number of outgoing packet carrier errors.
Output Queue Length Output queue length in bytes.
Collisions Number of packet collisions at this interface.
Flags Interface status indicators. Values include Up, Broadcast,
Running, and Multicast.