Specifications

3-195
Cisco Wide Area Application Services Command Reference
OL-16451-01
Chapter 3 CLI Commands
show interface
show interface
To display the hardware interface information for a WAAS device, use the show interface EXEC
command.
show interface {GigabitEthernet slot/port} | {ide control_num} | {InlineGroup slot/grpnumber}
| {InlinePort slot/grpnumber/{lan | wan}} | {PortChannel port-num} | {scsi device_num}
| {Standby group_num | usb}
Syntax Description
Defaults No default behavior or values.
Command Modes EXEC
Device Modes application-accelerator
central-manager
Examples The following is sample output from the show interface command. It displays information for
inlineGroup 0 in slot 1 configured on the WAE inline network adapter.
WAE612# show interface inlineGroup 1/0
Interface is in intercept operating mode.
Standard NIC mode is off.
Disable bypass mode is off.
VLAN IDs configured for inline interception: All
Watchdog timer is enabled.
Timer frequency: 1600 ms.
Autoreset frequency 500 ms.
The watchdog timer will expire in 1221 ms.
GigabitEthernet
slot/port
Displays the Gigabit Ethernet interface device information (only on suitably
equipped systems). Slot and port number for the Gigabit Ethernet interface.
The slot range is 0–3; the port range is 0–3. The slot number and port
number are separated with a forward slash character (/).
ide control_num Displays the IDE interface device information (controller number 0–1).
InlineGroup
slot/grpnumber
Displays the inline group information. Slot and inline group number for the
selected interface.
InlinePort Displays the inline port information. Slot and inline group number for the
selected interface.
lan Displays the inline port information for the LAN port.
wan Displays the inline port information for the WAN port.
PortChannel port-num Displays the port channel interface device information (number 1–2).
scsi device_num Displays the SCSI interface device information (number 0–7).
Standby group_num Displays the standby group information (number 1–4).
usb Displays the USB interface device information.